New 2,2-difluoro-1,3,2(2H)oxazaborines and merocyanines derived from them

Synthetic methods have been developed to prepare oxazaborines, the azaanalogues of 2,2-difluoro-1,3,2(2H)dioxaborines, which can form merocyanine dyes. The first oxazaborine merocyanines with the isomeric position of the coordinating nitrogen atom have also been obtained. Comparing the spectral properties of donor-acceptor dioxa- and oxazaborine dyes, it is seen that substitution of the 3-O atom by the NH group in the chelate ring has a slight effect on absorption and fluorescence band positions but causes the intensity redistribution between the 0-0 and 0-1 vibronic absorption peaks and thus induces a change in the absorption band shape due to the enhanced solvation of oxazaborines. Substitution of the 1-O ring atom by the NPh group leads to a bathochromic shift and a manifold increase in the fluorescence quantum yield for the corresponding boron chelate dyes.     

Radiological constraints of using building materials and industrial by-products in construction

The advantages of utilization of coal fly ash, phosphogypsum and some other industrial by-products in construction are discussed, as well as the technological and environmental problems caused by an elevated content of chemical/radioactive contaminants. Radiological aspects and legislation issues are analyzed. The tendency to develop stricter environmental norms observed in the last years in both national and international scale is noted. The reasons and possible methods of solving the difficulties with the application of legislation rules and radiation controls in construction industry are discussed. As an example, an experience with the new Israeli Standard 5098 regulating radioactivity in building products is reported. The principles of this standard are analyzed and compared to the Radiological Protection Principles Concerning the Natural Radioactivity of Building Materials Principles of Radiation (Radiological Protection Principles Concerning the Natural Radioactivity of Building Materials, Radiation Protection Report RP-112, EC, European Commission, Luxembourg, 1999) and other existing national standards and guidelines in the field.     

Ethylene polymerization with homogeneous and heterogeneous catalysts based on bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron complexes

A series of bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron chloride complexes were immobilized on oxide supports. The kinetics of ethylene polymerization by both homogeneous and heterogeneous systems was followed, the catalysts mostly demonstrating high activities. The effect of the ligands nature and reaction conditions on the catalytic activities and molecular weights of the resultant polyethylenes was examined. In contrast to homogeneous systems, the supported iron complexes were found to exhibit high and stable activity upon activation with triisobutyl aluminium, producing high‐molecular‐weight polyethylene with good morphology. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42674.     

Development of Saturable Absorbers for Laser Passive Q‐Switching near 1.5 μm Based on Transparent Ceramic Co2+:MgAl2O4

We describe the development of a reasonable cost Co²⁺:MgAl₂O₄ transparent ceramic plates fabrication technology that allows the producing of parts functioning as passive laser Q‐switches in the 1.3–1.7 μm domain. The main relevant material characteristics were measured. The absorption band, positioned between 1.2 and 1.7 μm, is typical of the ⁴A₂ (⁴F) → ⁴T₁ (⁴F) transition of Co²⁺ substituting Mg²⁺ ions in their T_d symmetry sites. The measured ground‐state absorption cross section σ_gs = 2.9 × 10^?19 cm², saturation contrast γ = 0.12, and depleted ground‐state recovery time τ₂ = 110–430 ns render such parts suitable for the intended application. The radiative lifetime was estimated as . The spin‐orbit splitting constant was estimated as ξ_SL??150 cm^?1 for the ⁴F parent ground state, and ξ_SL ? –575 cm^?1 for the ⁴P parent excited state. Obtained specimens had a transmission of ~80% (t = 2 mm, λ = 600 nm) and included some opaque, white spots. Further improvement of host optical transmission and resistance to laser damage are necessary.     

Development and benchmarking of a mechanical model for GFR plate-type fuel

The reference fuel design currently being considered within the Generation-IV Gas-cooled Fast Reactor (GFR) project is a ceramic plate matrix with a honeycomb inner structure containing small fuel cylinders. The fuel is mixed plutonium–uranium carbide, while the matrix material is silicon carbide. The present paper describes the mechanical part of a thermal–mechanical model being developed for studying the transient behavior of this highly heterogeneous fuel type. Benchmarking has been carried out against detailed finite-elements modeling (FEM).The resultant thermal–mechanical model can provide reliable fuel and cladding (matrix) stress/strain conditions to evaluate temperatures and neutronic feedbacks. As such, it has been integrated into PSI’s coupled code system “FAST”, which aims at the comprehensive safety analysis of advanced fast reactor systems.The detailed FEM analysis of the GFR fuel has been useful not only for benchmarking the new model, but also for obtaining an in-depth understanding of fuel stress/strain characteristics, which cannot be reproduced with simplified models. Thereby, the range of applicability of the new model has clearly been defined. In particular, the 3D FEM analysis has revealed a concentration of stresses at the pellet corners during pellet/matrix contact, which could lead to fuel element failure. This effect is found to be mitigated considerably, if the fuel pellets are shaped in a manner which enhances the contact area.     

Thermoacoustic energy analysis of transverse-pin and tortuous stacks at large acoustic displacements

A simplified method based on Rayleigh's criterion is developed for evaluating thermoacoustic power conversion in transverse-pin and tortuous stacks. Heat transfer and viscous losses are approximated by steady-flow correlations valid at large acoustic displacements with respect to a longitudinal pitch of a pin stack or a characteristic pore size of a random stack. A Lagrangian approach is employed to calculate temperature fluctuations of oscillating gas parcels inside the stack. A computational example is presented for a stack with an inline pin arrangement placed in a standing acoustic wave. Power conversion and efficiencies are evaluated for conditions relevant to a small-scale system. An indirect comparison is also made between theoretical results and experimental data for a prime mover with a wire mesh stack.     

Physicochemical Investigation of the Reaction of Components of the Si — Al — O — N — Ti System in the Si3N4 — Al2O3 — AlN — SiO2 — TiN — TiO2 Region. Part 2. Subsystems Si3N4 — AlN,TiN — AlN,Al2O3 — AlN

The reaction of components of the Si — Al — O — N — Ti system in its elements Si ₃N₄ — AlN, TiN — AlN, and Al ₂O ₃ — AlN was investigated by differential thermal and x-ray diffraction analysis. It was established that upon hot pressing mixtures of Si₃N ₄ and AlN (up to 1950°C) free silicon is formed by the decomposition of Si ₃N₄, which reacts with oxygen present as an impurity to form SiO. When TiN reacts with AlN a phase with the spinel structure (Al₂₃O ₂₇N ₅), which can form only in the presence of excess oxygen, appears in addition to the initial components. Spinel is also produced by the reaction of Al ₂O₃ with AlN. In this case a eutectic between Al ₂₃O₂₇N₅ and Al₂O₃ is observed.     

Compounding Unit Planetary Roller Extruder

Planetary roller extruders (PREs) are currently being employed first and foremost to feed calender/lamination units, for pelleting, for compounding powdered paint and for the reuse of recyclate. In these disciplines it is the most successful multi‐screw extruder. The range of materials that are compounded extends from classical plasticised poly(vinyl chloride) (PVC), via poly(propylene) (PP) and acrylonitrile‐butadiene‐styrene (ABS), through to powdered rubber. The planetary roller extruders convince in comparison with other compounding machines through the thermally carefully compounding, the balanced ratio of shear and heat transfer and the narrow residence time distribution. Experimental investigations to analyze the process behavior of PREs were carried out for the first time.

Homogenization and dispersion at a material‐bank in the planetary roller extrusion test stand.